Versa Puller Systems

With all the Belts and Rollers you need

Our Puller Models

The PM-22 is a 2″ X 4″ (50.8 X 101.6 mm) diameter pinch roll extrusion puller system that opens to a 2″ gap.  Available in either a right-to-left or left-to-right configuration, optional air opening/closing, gear or belt drive, and with either OSHA or CE style guarding.

It is available as a complete system with a color touchscreen and a user friendly remote control interface.  In the Remote mode the user can configure the controls to operate using a digital input, or a 0 to 10 VDC input that can be scaled to allow 10 VDC to equal any speed up to the maximum speed the system is configured for.  The PM-22 is recommended for operation at speeds up to 1,000 FPM.

The PM-25 is a 5.5″ X 4″ (139.7 X 101.6 mm) diameter pinch roll puller extrusion system that opens to a 2″ gap.  Available in either a right-to-left or left-to-right configuration, optional air opening/closing, gear or belt drive, and with either OSHA or CE style guarding.

It is available as a complete system with a color touchscreen and a user friendly remote control interface.  In the Remote mode the user can configure the controls to operate using a digital input, or a 0 to 10 VDC input that can be scaled to allow 10 VDC to equal any speed up to the maximum speed the system is configured for.  The PM-25 is recommended for operation at speeds up to 1,000 FPM.

The PM-55 is a 5.5″ X 4″ (139.7 X 101.6 mm) diameter pinch roll extrusion puller system that opens to a 5″ gap.  Available in either a right-to-left or left-to-right configuration, optional air opening/closing, gear or belt drive, and with either OSHA or CE style guarding.

It is available as a complete system with a color touchscreen and a user friendly remote control interface.  In the Remote mode the user can configure the controls to operate using a digital input, or a 0 to 10 VDC input that can be scaled to allow 10 VDC to equal any speed up to the maximum speed the system is configured for.  The PM-55 is recommended for operation at speeds up to 1,000 FPM.

The CM-22 is a 2″ X 9″ (50.8 X 228.6 mm) traction length caterpillar extusion puller system.  Available in either a right-to-left or left-to-right configuration, optional air opening/closing, gear or belt drive, and with either OSHA or CE style guarding.

It is available as a complete system with a color touchscreen and a user friendly remote control interface.  In the Remote mode the user can configure the controls to operate using a digital input, or a 0 to 10 VDC input that can be scaled to allow 10 VDC to equal any speed up to the maximum speed the system is configured for.  The CM-22 is recommended for operation at speeds up to 550 FPM.

The CM-44 is a 4″ X 9″ (101.6 X 228.6 mm) traction length caterpillar extrusion puller system.  Available in either a right-to-left or left-to-right configuration, optional air opening/closing, gear or belt drive, and with either OSHA or CE style guarding.

It is available as complete system with a color touchscreen and a user friendly remote control interface.  In the Remote mode the user can configure the controls to operate using a digital input, or a 0 to 10 VDC input that can be scaled to allow 10 VDC to equal any speed up to the maximum speed the system is configured for.  The CM-44 is recommended for operation at speeds up to 550 FPM.

The CM-218 is a 2″ X 18″ (50.8 X 457.2 mm) traction length caterpillar extrusion puller system.  Available in either a right-to-left or left-to-right configuration, optional air opening/closing, gear or belt drive, and with either OSHA or CE style guarding.

It is available as a complete system with a color touchscreen and a user friendly remote control interface.  In the Remote mode the user can configure the controls to operate using a digital input, or a 0 to 10 VDC input that can be scaled to allow 10 VDC to equal any speed up to the maximum speed the system is configured for.  The CM-218 is recommended for operation at speeds up to 700 FPM.

The CM-418 is a 4″ X 18″ (101.6 X 457.2 mm) traction length caterpillar extrusion puller system.  Available in either a right-to-left or left-to-right configuration, optional air opening/closing, gear or belt drive, and with either OSHA or CE style guarding.

It is available as a complete system with a color touchscreen and a user friendly remote control interface.  In the Remote mode the user can configure the controls to operate using a digital input, or a 0 to 10 VDC input that can be scaled to allow 10 VDC to equal any speed up to the maximum speed the system is configured for.  The CM-418 is recommended for operation at speeds up to 700 FPM.

Compare our Pinch Rolls
MODEL MAX. OPENING PULLING FORCE
PM-22 2” (50.8 mm) 2” (50.8 mm) Light
PM-25 5.5” (139.7 mm) 2” (50.8 mm) Light to Moderate
PM-55 5.5” (139.7 mm) 4” (101.8mm) Light to Moderate
Compare our Caterpillar Pullers

 

MODEL TRACTION LENGTH BELT WIDTH MAX. OPENING PULLING FORCE
CM-22 9” (228.6 mm) 2” (50.8 mm) 2” (50.8 mm) Moderate
CM-218 18” (457.2 mm) 2” (50.8 mm) 2” (50.8 mm) Moderate to Heavy
CM-44 9” (228.6 mm) 4” (101.6 mm) 4” (101.6 mm) Moderate
CM-418 18” (457.2 mm) 4” (101.6 mm) 4” (101.6 mm) Moderate to Heavy

Pullers on a Plate

Basic motorized system on a custom metal plate with a simple speed control. Perfect for integrating a turnkey puller into a larger piece of equipment. 

Puller Assemblies

basic Non-motorized assemby that can be integrated into any system. For those who love our puller design but require their own motors and controls.

Contact Us for a Free Quote

Our specialty is customer service. With decades of experience, we answer general and project-based questions that other companies can’t answer or won’t answer.

Feel free to contact us for help with your project.

Which product would you like to discuss?

What type of machines?

Which type of accessories?