Heavy Duty Servo

Experience Cutter Excellence

Our Heavy Duty Models

S2 Heavy Duty

is a heavy duty 2″ capacity servo extrusion cutter with nearly twice the cutting torque of our S2 servo.  It is quiet, efficient, and very easy to operate.  It can cut at rates up to 1,000 cuts/min. with knife speeds up to 1,700 RPM.  Combined with our LC-2000 length and batch control and a high resolution encoder it can hold +/- 0.005″ cut length tolerance cutting rigid material. The S2D cutter is ideal for cleanroom operation with no belts or other wear parts.

S3 Heavy Duty

The S3HD is a heavy duty 3″ capacity servo extrusion cutter with nearly twice the cutting torque of our S2 servo.  It is quiet, efficient, and very easy to operate.  It can cut at rates up to 1,000 cuts/min. with knife speeds up to 1,700 RPM.  Combined with our LC-2000 length and batch control and a high resolution encoder it can hold +/- 0.005″ cut length tolerance cutting rigid material. The S3HD cutter is ideal for cleanroom operation with no belts or other wear parts.

Compare our Heavy Duty Cutters
Model S2HD S3HD
Cut Rate Up to 1,000 CPM Up to 1,000 CPM
AC Motor 12 Amp 12 Amp
Max. Knife Speed 1,700 RPM 1,700 RPM
Max. Cut Capacity 2” (50.8 mm) OD Product 3” (76.2 mm) OD Product
Voltage *115 or 230V 50/60 Hz *115 or 230V 50/60 Hz
Max. Torque 276 lb-in (31.1 Nm 276 lb-in (31.1 Nm

* Cutter are either 115 VAC or 230 VAC

DAC Cutters

DAC extrusion cutters provide high cutting torque at a lower cost than servo models.  They provide excellent response time and accuracy through the use of the Versa Machinery proprietary Digitally Actuated Control (DAC).  They can be purchased to mount on your own table or Versa can provide a table for you. 

Titan Cutters

Titan cutters provide up to 1,750 in-lbs of cutting torque to cust products up to 6″ O.D.  Using our proprietary Digitally Actuated Circuitry (DAC) control they provide excellent response time and accuracy.

Servo Cutters

Servo extrusion cutters provide clean, quiet operation without the use of wear components such as those used in brake and clutch cutters.  This allows extended operation without requiring adjustments or parts replacements due to wear, making them ideal for cleanroom operation.

Available Extra Features:

Gap Indicator

Versa Pinch roll or belt gap indicators display the gap setting in 0.001” increments for improved ease of setup.

Lubrication

Drip Lube System are available with a variety of reservoir sizes, and independantly controlled feeds for lubrication of the knife and/or the cutter entrance bushing.

Slide Bases

Cutter slide bases are offered for both X and Y axis motion in a wide variety of sizes to make string-up quick and easy.

Request a Quote