Non-Motorized Pullers

Experience Puller Excellence

Our Non-Motorized Caterpillar Models

 

For those that only need the caterpillar puller assembly. Great as a replament or for constructing your own system.

The C-22 is a 2 X 9″ (50.8 X 228.6 mm) traction length caterpillar extrusion puller assembly, with timing belts and pulleys.  Available in either a right-to-left or left-to-right configuration, optional air opening/closing, gear or belt drive, and with either OSHA or CE style guarding.

Offered as a non-motorized puller assembly for replacement purposes or for building your own system. The C-22 is recommended for operation at speeds up to 550 FPM.

 

The C-44 is a 4″ X 9″ (101.6 X 228.6 mm) traction length caterpillar extrusion puller assembly, with timing belts and pulleys.  Available in either a right-to-left or left-to-right configuration, optional air opening/closing, gear or belt drive, and with either OSHA or CE style guarding.

Offered as a non-motorized puller assembly for replacement purposes or for building your own system. The C-44 is recommended for operation at speeds up to 550 FPM.

The C-218 is a 2″ X 18″ (50.8 X 457.2 mm) traction length caterpillar extrusion puller assembly, with micro-V belts and pulleys.  Available in either a right-to-left or left-to-right configuration, optional air opening/closing, gear or belt drive, and with either OSHA or CE style guarding.

Offered as a non-motorized puller assembly for replacement purposes or for building your own system. The C-218 is recommended for operation at speeds up to 700 FPM.

The C-418 is a 4″ X 18″ (101.6 X 457.2 mm) traction length caterpillar extrusion puller assembly, with micro-V belts and pulleys.  Available in either a right-to-left or left-to-right configuration, optional air opening/closing, gear or belt drive, and with either OSHA or CE style guarding.

Offered as a non-motorized puller assembly for replacement purposes or for building your own system. The C-218 is recommended for operation at speeds up to 700 FPM.

Versa “C” series

The Versa “C” series caterpillar extrusion pullers provide an even distribution of clamping force over the surface of the product.  This enables greater pulling forces without deformation of the product. Belt configurations range from 2” (50.8 mm) width x 9” (230 mm) length to 4” (101.6 mm) width x 18” (460 mm) length.  Uniform pressure is maintained over the entire traction length.

Versa “P” series

The Versa “P” series pinch wheel extrusion pullers are commonly used where materials are not sensitive to a pinching pressure and in operations where minimal pulling force is necessary.  Pinch wheel models are offered with 2” (50 mm) or 5.5” (139.7 mm) wide rolls.  Numerous roll materials are available, offering different traction and wear characteristics.

Compare our Caterpillar Pullers

 

MODEL TRACTION LENGTH BELT WIDTH MAX. OPENING
C-22 9″ (228.6 mm) 2” (50.8 mm) 2” (50.8 mm)
C-44 9″ (228.6 mm) 4” (101.6 mm) 4” (101.6 mm)
C-218 18″ (457.2 mm) 4” (101.6 mm) 4” (101.6 mm)
C-418 18″ (457.2 mm) 4” (101.6 mm) 4” (101.6 mm)

Request a Quote