Servo Cutter/VFD Puller

Experience Cutter-Puller Excellence

Our Servo Cutter/VFD Puller Models

Our Servo Cutter – VFD Puller systems can include a 1″, 2″, or 3″ capacity servo extrusion cutter on a 4″ slide base, a pinch roll or caterpillar puller with a Variable Frequency Drive (VFD), 7″ color touchscreen for controlling the puller and all remote functions, and a Versa LC-2000 combination length and batch control, on a heavy duty steel table with casters and leveling screws.  The LC-2000 allows the operator to quickly and easily enter the cut length and batch count.  The cut length can be entered in millimeters, inches, or feet.   The servo extrusion cutters provide maintenance free operation and the option to choose one of three knife speeds for cutting a variety of materials.  The systems can achieve cutting rates up to 1,000 cuts/minute, and hold cut length tolerance of +/- 0.005″ or better cutting rigid materials.

Model

S1

S2 S2HD

S3HD

Max. Cutting Capacity

1” (25.4 mm)

2” (50.8 mm) 2” (50.8 mm)

3” (76.2 mm)

Motor/Drive Amperage

6 Amp

6 Amp 12 Amp

12 Amp

Max. Cutting Torque

150 lb-in (16.9 Nm)

150 lb-in (16.9 Nm) 276 lb-in (31.1 Nm)

276 lb-in (31.1 Nm)

Max. Knife Speed

1,700 RPM

Max. Cutting Rate

1,000 CPM

Cut Length Range

0.001” to 999.999”

Feeder Options

2”W X 4” Dia. Pinch Wheel

2”W X 9”L  Caterpillar

2”W X 18”L Caterpillar

4”W X 9”L Caterpillar

4”W X 18”L Caterpillar

Feed Range

0 to 150 FPM Standard

Other Ranges Available up to 700 fpm

Electrical Requirements

230V/1ph/50Hz or 60Hz

(380V to 480V, 3ph/50Hz or 60Hz are also available)

DAC Cutter/VFD Puller

DAC cutter/puller systems can include an electro-mechanical brake and clutch extrusion cutter on a 4″ slide base, a pinch roll or caterpillar puller with a Variable Frequency Drive (VFD), 7″ color touchscreen for controlling the puller and all remote functions, and a Versa LC-2000 combination length and batch control, on a heavy duty steel table with casters and leveling screws.

ACT Servo Cutter Servo Puller

Our ACT series Servo Cutter – Servo Puller systems automatically cut the same part lenght even as speed changes are made on the fly.  They include a built-in cut length and batch control, cutting rates up to 3,000 cuts/minute, a wide variety of remote control features, and recipe storage for over 250 different parts.  ACT series systems can hold +/- 0.005″ cut length tolerance or better when cutting rigid materials.

Available Extra Features:

Gap Indicator

Versa Pinch roll or belt gap indicators display the gap setting in 0.001” increments for improved ease of setup.

Lubrication

Drip Lube System are available with a variety of reservoir sizes, and independantly controlled feeds for lubrication of the knife and/or the cutter entrance bushing.

Slide Bases

Cutter slide bases are offered for both X and Y axis motion in a wide variety of sizes to make string-up quick and easy.

Request a Quote